FOOD PRODUCTS

Inspection systems in the food industry is on the outgoing goods inspection. Foreign objects made of metals, glass or stones must be reliably removed, and other quality defects must be reduced as far as possible. This ranges from a piece of stainless steel wire in burger patties to a missing clip on bar stock.

They are an indispensable means of meeting stringent quality guidelines such as IFS, BRC, TESCO and others. In incoming goods and production, they reduce costs and increase process reliability; for example, by controlling meat blocks or protecting processing machines.

Overview brochure

QUICKTRON 07 RH

High-end metal separator for examining bulk materials in free fall

Metal separators of the QUICKTRON 07 RH type are used for the examination of powders and granulates in free-fall lines. They are available in nominal diameters of up to 300 mm and cover all areas of application, from the laboratory to lorry loading. Its hygienic structure and easy cleanability prevent cross-contamination between product batches. Depending on the requirement, they can increase process reliability or also perform the inspection of outgoing goods.

P-TRON 07 GM

High-end metal separator with separation diverter for integration into pneumatic conveyor lines

Metal separators of the P-TRON 07 GM type are used for the examination of granulates, ground material or powders in pneumatic conveying lines. Versions for horizontal and vertical installation, as well as for high product temperatures after the dryer, are available. The systems can also be specially approved for potentially explosive areas.

MEATLINE 07 O

Mobile metal detector for connection to a vacuum filler, including rotary separation mechanism

Metal separators of the MEATLINE 07 O series are connected to the outlet of vacuum fillers in sausage production. Mechanical connections for all common sausage and ham fillers are available, as well as electronic control adapters for signal exchange between the filler, metal detector and subsequent systems such as clippers or linkers.

X-RAY DEVICES

EASYSCOPE 600

X-ray inspection system for the examination of packaged products of width up to 570 mm.

EASYSCOPE 400

X-ray inspection system for the examination of packaged products of width up to 380 mm.

EASYSCOPE ST

X-ray inspection system for the examination of narrow, packaged products of width up to 238 mm.

MESUTRONIC

EASYSCOPE 400

X-ray inspection system for the examination of packaged products of width up to 380 mm.

X-ray inspection systems of the easySCOPE 400 type are used for inspecting medium-sized products. Objects with widths of up to 380 mm can be examined for foreign bodies and quality defects. The generous standard scope of delivery is complemented by accessories such as an air conditioner, separation systems or extended software functions for quality improvement.